July 25, 2009 - Janel and I took a bit of a break and headed off on a trip for a while. Three weeks away is great for clearing the head. Plus, it meant that there were a new set of Moser axles waiting for me upon my return.
But I have a problem. Part of the error in the original Moser axles was a C clip groove that was 0.025" too large in diameter. So I had to tap the clips into place. If I had more experience with these sorts of axles, that should have been a danger sign. The result is that I simply can't get the clip off one of the axles. It's the side with the ring gear, which is blocking my access somewhat.
I've been fighting this for a while. Right now, it looks as if the best option will be destructive removal of the clip, and the best suggestion I've heard for that is freezing with liquid nitrogen and then employing a short, sharp shock with a chisel. Cutting doesn't look plausible due to access problems. I'll cut the axle in half if I have to, but I have to figure out how to get in there to do the cutting.
The good news is that the only part of this whole assembly I really need to keep is the housing. If I have to cut the differential apart, so be it.
I also learned yesterday that Z28 Camaros have a Torsen differential. Excellent. No, wait, that's 1999-02 Z28s. Our donor is a 1998. I think that means we have a Positraction. I'm trying to learn more about that now. tags: rear axle |