August 29, 2010 - Of course, the first thing I did with the engine in place was to grind off some of that new paint.
The oil pan drops below the steering crossmember slightly, and I wanted to protect it from potential impacts. It should be 5" off the ground, but still. A piece of 1" square tubing welded to the bottom of the cross member does the job perfectly, offering to sacrifice itself in the event I meet a big obstacle. I'll paint it up again once I've done a couple of other things.
The piece of steel was actually part of the shipping crate the Seven arrived in. There's a little bit of each of the cars going into this one!
tags: oil pan, protection |
THE DIARY